Hi i am wanting to make a racing seat to be like this http://www.youtube.com/watch?feature=player_embedd
Start with cardboard (it's the cheapest and easiest to work with), and when you get a template, start building!
I am autistic, but not always eloquent.
"Racing makes a heroin addiction seem like a vague wish for something salty" - Peter Egan
Not all curves that you brake for are corners that you turn for-Matterhorn....
That's one of the coolest rigs I've ever seen (and it has a punny name to boot!), but I think you could make your own for way less money. I don't see how that could possibly cost $4000, or how a custom paint job would set you back an additional $1500. As MastrGT said, plan it out. Watch the videos on their site, look at their photo gallery, see how many elements you can "borrow" for your own design. It looks simple enough; just a few hinges, sliders, and wooden boards.
You can make one for waaaay less money. I got the racing seat for $35.00(real racing seat..lol) the rig i made out of pre-cut wood that cost me about $20.00 and brackets to put it together cost around $7.00.
You can try making one of your own. You can probably get a seat from a car from the auto salvage year fairly cheap, and then improvise the rest. Bolt together some metal tubing with stop nuts or lock washers, and you'll have a racing seat.
I'm and old fart. (51 going on 21)
So for me all the Game seats have one major problem.. The are too darn Low to the ground..
If I sat that low, I'd never get up out of that seat..
So when I put together my rig, I made a 2' x 2' platform 15" high, so when I mounted the seat on top, it was at 24" to the seat height.
Makes it easy for me to sit in it, and later, get up out of it.
On the same token, I had to have a platform for the Pedals.
So my Seat to Pedal relationship is about the same, just raised up off the floor.
Something for you to consider if you're an old fart like me.
This is what I started with. A seat from a U-Pull-It salvage yard $25 about $50 of lumber and hardware. A folding table. I already had the wheel..
I borrowed your design to make a mock up of a foldable coffee table version. I think your cockpit could be used as a good starting point!
You would just have to add a couple of hinges on either side of the seat section, a board behind the seat for a table top, a base board at the foot of the cockpit, and a hinged wheel support board. When folded, the green board would be on top, and the red board would fold down to where the pedals are.